A clearer kitchen

How to clean rangehood filters

Greasy rangehood filters stop your extractor working well and can drip onto the cooktop. Most metal filters clean up with hot water, dishwashing liquid and baking soda in about half an hour. Here is how to do it safely, and when a filter needs replacing instead.

For Wellington home cooks with greasy rangehood filters.

A gloved hand wiping a stone bench with a blue microfibre cloth
Wiping down a stone kitchen bench with a microfibre cloth.
Wellington, since 1997Fully insured & security checkedFree, tailored quotes

The short answer

Turn off the rangehood, remove the metal filters and soak them for 15 to 30 minutes in very hot water with dishwashing liquid and a few tablespoons of baking soda. Scrub gently with a soft brush, rinse well and let them dry completely before refitting. Charcoal filters cannot be washed and are replaced.

Check which rangehood filter you have

FilterWhat it looks likeCan it be washed?
Mesh (aluminium)Layers of fine metal mesh in a frameYes, by hand; check the manual before using a dishwasher
Baffle (stainless steel)Angled metal slatsYes, by hand and often in the dishwasher
Charcoal (carbon)A pad or cartridge, often behind the grease filter in recirculating hoodsNo: replace it on the schedule in your manual

Your rangehood manual lists the filter type and the cleaning method the maker recommends. Use that first.

How to clean rangehood filters, step by step

What you need

  • A sink, large tub or baking dish big enough to lay the filters flat
  • Very hot water from the tap (or a recently boiled kettle, handled carefully)
  • Dishwashing liquid and baking soda
  • A soft brush, such as a washing-up brush or old toothbrush
  • Rubber gloves and a towel
  1. Turn off the rangehood and let the cooktop cool. Switch off at the wall if your manual says to.
  2. Remove the filters. Most have a release tab or latch; support the filter as it comes free.
  3. Fill the sink with very hot water, a good squeeze of dishwashing liquid and two to four tablespoons of baking soda. Stir to dissolve.
  4. Soak the filters flat for 15 to 30 minutes, turning them halfway.
  5. Scrub gently with the brush, following the mesh or slats. Avoid steel wool, which damages aluminium.
  6. Rinse under hot running water until it runs clear.
  7. Dry completely on a towel before refitting, so no water drips into the motor.

Can you put rangehood filters in the dishwasher?

Stainless steel baffle filters usually can. Aluminium mesh filters can discolour in a dishwasher, especially with strong detergent; many makers allow it on a gentle cycle and some do not. Check your manual. If you use the dishwasher, place the filter upright on the bottom rack, run it on its own and expect a dull finish over time on aluminium.

How to degrease a heavily clogged rangehood filter

For thick, sticky grease, start by repeating the soak with fresh, very hot water and more baking soda. If that is not enough, a kitchen degreaser can help:

  • choose one labelled safe for the filter's metal (many strong degreasers and oven cleaners are not safe on aluminium);
  • wear gloves and work in a ventilated space;
  • apply, leave for the time on the label, then scrub gently and rinse very well;
  • never mix cleaning products, especially anything containing bleach.

If the mesh is bent, holed or still clogged after two attempts, replace the filter rather than forcing it. Your rangehood's maker or an appliance store can supply the right replacement.

How often should rangehood filters be cleaned?

A good rhythm for regular home cooking is to clean metal filters about once a month, and more often if you fry or wok-cook a lot. A simple check: if the filter feels sticky or looks dark, it is time. While the filters are out, wipe the inside of the hood and the underside of the canopy with warm soapy water.

Add the rangehood to your kitchen cleaning checklist so it is not forgotten, and see how to clean an oven for the rest of the cooking area.

When to call a professional

If the oven, hob and rangehood all need attention, it is often quicker to hand the whole job over. Our oven cleaning in Wellington can include the rangehood filters, and our spring cleaning service covers the kitchen including the oven and fridge. For a whole-home reset, see deep cleaning in Wellington.

Your questions, answered

Can I use oven cleaner on rangehood filters?

Only if the filter's maker allows it. Strong oven cleaners can discolour or damage aluminium mesh, so start with hot soapy water and baking soda.

Does vinegar clean rangehood filters?

Vinegar can help with light film, but grease responds better to hot water, dishwashing liquid and baking soda.

How do I know if a charcoal filter needs replacing?

Follow the replacement schedule in your manual. If cooking smells linger even with the fan on, it may be due.

Should I clean the filters before moving out?

Yes. Rangehood filters are a common item on move-out inspections, and they are included in our end of tenancy kitchen clean.

About this guide

This guide was written by Peace of Mind Cleaning Services, a family-run Wellington cleaning business caring for homes and workplaces since 1997. It was last reviewed in November 2026. The steps follow general manufacturer guidance for mesh, baffle and charcoal filters; always check your own rangehood manual first. If something here does not match your experience, call us on 021 042 9213 or send a note through our contact form.

Your next step

Hand over the kitchen jobs

If the rangehood is one of several kitchen jobs, tell us what needs doing and we will reply with a free quote.

Prefer to talk it through? Call Lisa and Francis.

021 042 9213
Francisleong56@gmail.com

Request your free quote

No obligation. Just a friendly first step.

One voucher per household. Eligibility confirmed with your quote.

Required when attaching a voucher so Lisa and Francis can check the household’s eligibility.

We’ll use these details to respond to your enquiry and arrange your cleaning quote.